Thiol-Ene Click Cross-linking of Starch Oleate Films for Enhanced Properties.

Biobased films were synthesized from starch oleate (DS = 2.2) cross-linked with polyethylene glycol with Mn = 2000 and 1000 g · mol-1, and ethylene glycol, all of which were esterified with either lipoic acid (LA) or 3-mercaptopropionic acid (MPA). Cross-linking was achieved through a UV-initiated thiol-ene click, and confirmed by Fourier transform infrared spectroscopy and rheometry. The films exhibit higher degradation temperatures, and an increased degree of crystallinity as cross-linker length increased. The introduction of MPA-based cross-linkers resulted in hydrophilic films, while the contact angle was barely affected by the addition of LA-based cross-linkers. A reduction in maximum strength upon introducing the cross-linkers was observed, while an increase in elongation was observed for most of the LA-based cross-linkers. Our results demonstrate the potential for tuning the mechanical and thermal properties of starch-based films through the cross-linker choice, with some formulations exhibiting increased flexibility that may be well suited for packaging applications.

Green-emitting functionalized silicon nanoparticles as an "off-on" fluorescence bio-probe for the sensitive and selective detection of mercury (II) and 3-mercaptopropionic acid.

Herein, we developed a class of functionalized silicon nanoparticles (F-SiNPs) bio-probes named thiol-conjugated F-SiNPs. They combine excellent biocompatibility with small dimensions (<10 nm) and biological usefulness with sustained and robust fluorescence (3.32% photoluminescent quantum yield). Identifying 3-Mercaptopropionic acid (3-MPA), which lowers the quantity of gamma-aminobutyric acid in the brain, and mercury (Hg2+) was a crucially important step since their excessive levels are a sign of several disorders. Using F-SiNPs as a fluorescent bio-probe, we provided an "off-on" technique for sensitively and selectively determining Hg2+ and 3-MPA in this study. The 3-(2-aminoethylamino) propyl (dimethoxymethylsilane) and basic fuchsin as precursors were hydrothermally treated to produce the F-SiNPs exhibiting green fluorescence. Our results suggest that Hg2+ reduced the fluorescence of F-SiNPs because of strong ionic interactions and metal-ligand binding among many thiols and carboxyl groupings at the surface of Hg2+ and F-SiNPs. Additionally, the resultants demonstrated that after being quenched by Hg2+, the produced F-SiNPs led to the distinctive "off-on" response to 3-MPA. Moreover, the method could detect Hg2+ and 3-MPA with limits of detection of 0.065 µM and 0.017 µM, respectively. The technique employed is quick, easy, affordable, and environmentally friendly. The sensing platform has successfully determined Hg2+ and 3-MPA in urine, water, and human serum samples.

An Electrochemical Immunosensor for the Determination of Procalcitonin Using the Gold-Graphene Interdigitated Electrode.

Procalcitonin (PCT) is considered a sepsis and infection biomarker. Herein, an interdigitated electrochemical immunosensor for the determination of PCT has been developed. The interdigitated electrode was made of the laser-engraved graphene electrode decorated with gold (LEGE/Aunano). The scanning electron microscopy indicated the LEGE/Aunano has been fabricated successfully. After that, the anti-PTC antibodies were immobilized on the surface of the electrode by using 3-mercaptopropionic acid. The electrochemical performance of the fabricated immunosensor was studied using electrochemical impedance spectroscopy (EIS). The EIS method was used for the determination of PCT in the concentration range of 2.5-800 pg/mL with a limit of detection of 0.36 pg/mL. The effect of several interfering agents such as the C reactive protein (CRP), immunoglobulin G (IgG), and human serum albumin (HSA) was also studied. The fabricated immunosensor had a good selectivity to the PCT. The stability of the immunosensor was also studied for 1 month. The relative standard deviation (RSD) was obtained to be 5.2%.

A comprehensive investigation of zeolite-rich tuff functionalized with 3-mercaptopropionic acid intercalated green rust for the efficient removal of HgII and CrVI in a binary system.

In this study, the 3-mercaptopropionic acid (MA) was chosen to achieve the anionic intercalation into the green rust (GR) materials (MA-GR). The zeolite-rich tuff functionalized with the MA-intercalated GR (MA-GR-tuff) was subsequently synthesized and used to remove both HgII cations and CrVI anions in a binary system. MA-GR-tuff showed the best adsorption capacities to both HgII and CrVI among the adsorbent materials. The optimal combination of parameters was determined as the molar ratio of FeII to FeIII of 3.5, the molar ratio of OH- to the total iron of 3.75, the molar ratio of MA to the total iron of 2.5, and the mass ratio of the total iron to the tuff of 1.25. The pseudo-first-order kinetic model was appropriate in describing the kinetic sorption of CrVI by MA-GR-tuff. Both the pseudo-first-order kinetic model and Elovich were suitable for explaining HgII sorption. The maximum monolayer adsorption capacities of MA-GR-tuff towards CrVI and HgII were 185.19 mg/g and 72.99 mg/g, respectively. More flocs and plumes were formed in the MA-GR while the intercalation and more pores and crevices of different sizes were found in the MA-GR-tuff. Sulfhydryl complexation and the molecular sieve of tuff obviously both played a role in influencing the adsorption process. This study directly overcomes the drawback brought by the natural tuff to the treatment of a cationic-and-anionic binary system and supplies a new kind of tuff-based adsorbent for the potential use for the remediation of HM-contaminated wastewater.

Nanostructured Cyclodextrin-Mediated Surface for Capacitive Determination of Cortisol in Multiple Biofluids.

The aim of this work is to develop a reusable polypropylene glycol (PPG):ß-cyclodextrin (ßCD) biosensor for cortisol detection. To achieve the most stable support for ßCD, we developed two PPG surfaces. The first surface is based on a gold surface modified with SAM of 3-mercaptopropionic acid (3MPA), and the second surface is based on a glassy carbon surface grafted with 4-carboxyphenyl diazonium salt. We characterized both surfaces by EIS, XPS, and ATR-FTIR and evaluated the stability and reusability of each surface. We found the GC-carboxyphenyl-PPG:ßCD is stable for at least 1 month. We have also demonstrated the reusability of the surface up to 10 times. In detecting cortisol, we used a nonfaradaic electrochemical impedance capacitive model to interpret the surface confirmation changes. We achieved sensitive detection of cortisol in PBS buffer, urine, and saliva with limit of detection of 2.13, 1.29, and 1.33 nM, respectively.

Chromatographic and spectrophometric studies of vanadate (+V) reduction by 3-mercaptopropionic acid.

The reduction of vanadate (+V) in the presence of 3-mercaptopropionic acid was studied using a chromatographic method for the determination of vanadate (+V) versus vanadyl (+IV) species. Ion chromatography was combined with spectrophotometric investigation of the absorption properties of the solution. The chromatographic method for the separation of vanadate (+V) and vanadyl (+IV) was carried out with an anion exchange column. In the initial reaction mixture containing vanadate (+V) and 3-mercaptopropionic acid, ethylenediaminetetraacetic acid - EDTA was added in an excessive amount relative to the concentration of reactants in the solution. After the ligand exchange reaction, the added EDTA terminates the reduction, allowing redox speciation in the solutions. A strong pH dependence of the reduction rates in the investigated solution was observed. The vanadate reduction seems to proceed in 2 steps: 1) formation of the intermediate vanadate (+V)-thioester; 2) reduction reaction and formation of the vanadyl (+IV)-thiol complex. The obtained results strongly suggest that the reaction of vanadate (+V)-thioester formation is proton catalyzed. It was observed that the overall reduction rates are pH dependent due to the complex vanadate (+V) solution speciation and changes in the ionic form of 3-mercaptopropionic acid.

Overcoming chemoresistance to b-raf inhibitor in melanoma via targeted inhibition of phosphoenolpyruvate carboxykinase1 using 3-mercaptopropionic acid.

The resistance of melanoma to BRAF inhibitors remains a tough clinical challenge. In order to explore the underlying mechanism of drug resistance in melanoma, we established the resistant cell line to vemurafenib, and assessed the changes of drug-resistant cells on proliferation, apoptosis, oxidative stress and tumor stemness. Our results suggest that phosphoenolpyruvate carboxykinase1 (PCK1) is activated and inhibits the oxidative stress caused by vemurafenib in drug-resistant cells. Long term treatment of vemurafenib increases the expression of PCK1 which reduces the production of reactive oxygen species (ROS) by activating PI3K/Akt pathway. After the inhibition of PCK1 by 3-mercaptopropionic acid (3-MPA), the therapeutic sensitivity of vemurafenib is restored. In conclusion, this study disclosed that drug-resistant cells appeared to regulate their own proliferation, oxidative stress and tumor dryness by activating Akt/PCK1/ROS pathway, and shed new insights into acquiring drug resistance in melanoma.

Fine tuning of CdxZn1-xS for photo-depolymerization of alkaline lignin into vanillin.

Lignin is abundant and contains a large number of aromatic groups. Herein, CdxZn1-xS photocatalyst with tunable band gap energy was successfully synthesized by using 3-mercaptopropionic acid as a structure tuning additive. CdxZn1-xS can depolymerize alkaline lignin to vanillin by the photocatalytic process. Each gram of alkaline lignin can produce 46.5 mg of vanillin. 2-Phenoxy-1-phenylethanol (PP-ol) and other model compounds were used to understand the depolymerizing process of lignin. Fine tuned CdxZn1-xS can effectively cleave the Cß-O-4 bond existed in PP-ol under simulated sunlight. The highest conversion of PP-ol was 89.5% with phenol and acetophenone yields of 66.2% and 33.5%, respectively. The mechanism studies confirm that the Cα-H in PP-ol and lignin is firstly dehydrogenated to form Cα radical intermediates, and then the photogenerated electrons break the adjacent Cß-O bond. This research provides a new strategy to prepare valuable chemicals by virtue of renewable biomass and simulated sunlight.

Structure of 3-mercaptopropionic acid dioxygenase with a substrate analog reveals bidentate substrate binding at the iron center.

Thiol dioxygenases are a subset of nonheme iron oxygenases that catalyze the formation of sulfinic acids from sulfhydryl-containing substrates and dioxygen. Among this class, cysteine dioxygenases (CDOs) and 3-mercaptopropionic acid dioxygenases (3MDOs) are the best characterized, and the mode of substrate binding for CDOs is well understood. However, the manner in which 3-mercaptopropionic acid (3MPA) coordinates to the nonheme iron site in 3MDO remains a matter of debate. A model for bidentate 3MPA coordination at the 3MDO Fe-site has been proposed on the basis of computational docking, whereas steady-state kinetics and EPR spectroscopic measurements suggest a thiolate-only coordination of the substrate. To address this gap in knowledge, we determined the structure of Azobacter vinelandii 3MDO (Av3MDO) in complex with the substrate analog and competitive inhibitor, 3-hydroxypropionic acid (3HPA). The structure together with DFT computational modeling demonstrates that 3HPA and 3MPA associate with iron as chelate complexes with the substrate-carboxylate group forming an additional interaction with Arg168 and the thiol bound at the same position as in CDO. A chloride ligand was bound to iron in the coordination site assigned as the O2-binding site. Supporting HYSCORE spectroscopic experiments were performed on the (3MPA/NO)-bound Av3MDO iron nitrosyl (S = 3/2) site. In combination with spectroscopic simulations and optimized DFT models, this work provides an experimentally verified model of the Av3MDO enzyme-substrate complex, effectively resolving a debate in the literature regarding the preferred substrate-binding denticity. These results elegantly explain the observed 3MDO substrate specificity, but leave unanswered questions regarding the mechanism of substrate-gated reactivity with dioxygen.

Model, Simulation, and Experiments on Moving Exchange Boundary via Ligand and Quantum Dots in Chip Electrophoresis.

Herein, the quench model of the moving exchange boundary (MEB) was first created via a ligand of 5,5'-dithiobis(2-nitro-benzoic acid) (DTNB) and group of 3-mercaptopropionic acid (MPA) capped on QDs, and then the recovery model was formed via MPA and 2-nitro-5-thiobenzoic acid (TNB) capped on QDs. The theory on MEB dynamics and width was developed based on the two reversible models, the simulation was conducted for the illumination of MEB, and the protocol was described for the MEB runs. The experiments revealed that (i) the quench model could be created via DTNB and MPA capped on QDs and the recovery one could be in situ formed via MPA and TNB capped on QDs, showing the feasibility of MEB models; (ii) the simulations on MEB dynamics and width were in coincidence with the theoretic predictions, showing the validity of two models; and (iii) the experiments demonstrated the validity of models, predictions, and simulations. The models and theory have potential for development of a biosensor, nanoparticle characterization, separation science, and an affinity assay of ligand-QDs.

An injectable hydrogel with pH-sensitive and self-healing properties based on 4armPEGDA and N-carboxyethyl chitosan for local treatment of hepatocellular carcinoma.

Injectable hydrogels with pH-sensitive and self-healing properties have great application potential in the field of anti-cancer drug carriers. In this work, an injectable hydrogel is prepared using 4armPEG-benzaldehyde (4armPEGDA) and N-carboxyethyl chitosan (CEC) as a new drug carrier. The gelation time, equilibrium swelling rate, degradation time, and dynamic modulus of the injectable hydrogels can be adjusted by merely changing the concentration of 4armPEGDA. The volume of the hydrogel shrinks at pH 5.6 and expands at pH 7.4, which helps to control the release of anti-cancer drug. At pH 5.6, the hydrogels show a fast and substantial Dox release effect, which is five times higher than that at pH 7.4. In vitro cumulative drug release of all the hydrogels reached equilibrium on about the fourth day, and the hydrogel is completely degraded within five days, which contributes to the Dox-loaded hydrogel to further release the remaining Dox. Moreover, the Dox-loaded hydrogel shows a strong inhibitory effect on the growth of human hepatocellular carcinoma cells (HepG2). Finally, the anti-tumor model experiment in vivo demonstrated that the Dox-loaded hydrogel can significantly inhibit tumor growth within five days. Therefore, such injectable hydrogels are excellent carriers for the potential treatment of hepatocellular carcinoma.

DNA Electrochemical Biosensor Based on Iron Oxide/Nanocellulose Crystalline Composite Modified Screen-Printed Carbon Electrode for Detection of Mycobacterium tuberculosis.

Death from tuberculosis has resulted in an increased need for early detection to prevent a tuberculosis (TB) epidemic, especially in closed and crowded populations. Herein, a sensitive electrochemical DNA biosensor based on functionalized iron oxide with mercaptopropionic acid (MPA-Fe3O4) nanoparticle and nanocellulose crystalline functionalized cetyl trimethyl ammonium bromide (NCC/CTAB) has been fabricated for the detection of Mycobacterium tuberculosis (MTB). In this study, a simple drop cast method was applied to deposit solution of MPA-Fe3O4/NCC/CTAB onto the surface of the screen-printed carbon electrode (SPCE). Then, a specific sequence of MTB DNA probe was immobilized onto a modified SPCE surface by using the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) coupling mechanism. For better signal amplification and electrochemical response, ruthenium bipyridyl Ru(bpy)32+ was assigned as labels of hybridization followed by the characteristic test using differential pulse voltammetry (DPV). The results of this biosensor enable the detection of target DNA until a concentration as low as 7.96 × 10-13 M with a wide detection range from 1.0 × 10-6 to 1.0 × 10-12 M. In addition, the developed biosensor has shown a differentiation between positive and negative MTB samples in real sampel analysis.

Surface Coating Structure and Its Interaction with Cytochrome c in EG6-Coated Nanoparticles Varies with Surface Curvature.

The composition, orientation, and conformation of proteins in biomolecular coronas acquired by nanoparticles in biological media contribute to how they are identified by a cell. While numerous studies have investigated protein composition in biomolecular coronas, relatively little detail is known about how the nanoparticle surface influences the orientation and conformation of the proteins associated with them. We previously showed that the peripheral membrane protein cytochrome c adopts preferred poses relative to negatively charged 3-mercaptopropionic acid (MPA)-gold nanoparticles (AuNPs). Here, we employ molecular dynamics simulations and complementary experiments to establish that cytochrome c also assumes preferred poses upon association with nanoparticles functionalized with an uncharged ligand, specifically ω-(1-mercaptounde-11-cyl)hexa(ethylene glycol) (EG6). We find that the display of the EG6 ligands is sensitive to the curvature of the surface-and, consequently, the effective diameter of the nearly spherical nanoparticle core-which in turn affects the preferred poses of cytochrome c.

MPA-CdTe quantum dots as "on-off-on" sensitive fluorescence probe to detect ascorbic acid via redox reaction.

Mercaptopropionic acid (MPA) capped CdTe quantum dots (MPA-CdTe QDs) were synthesized in aqueous medium by hydrothermal method, which modified by Fe3+ could be used as a fluorescent probe to detect ascorbic acid (AA). MPA-CdTe QDs fluorescence probe could be used as successive sensor for metal ions and AA with "on-off-on" process. The fluorescence of QDs was quenched after adding Fe3+ to MPA-CdTe QDs. Then, the fluorescence of the Fe3+@MPA-CdTe QDs can be sensitively turned on by AA to give an "on-off-on" fluorescence response according to the oxidation-reduction between Fe3+ and AA. There was a linear relationship between fluorescence intensity quenching value and the concentration of Fe3+ in the range of 2-10 µM since Fe3+ sensitively reacted with CdTe QDs. The linear detection range for AA was 0.1-1 µM with a limit of detection of 6.6 nM. The principle is proved by fluorescence emission spectroscopy, nuclear magnetic resonance spectroscopy. The proposed method is successfully used to detect the AA in human plasma sample.

Sensitive and selective nitrite assay based on fluorescent gold nanoclusters and Fe2+/Fe3+ redox reaction.

In recent years, gold nanoclusters (AuNCs) have received considerable attention as optical transducers in chemo/biosensors. Herein, a facile and efficient assay for NO2- has been successfully developed based on the fluorescence quenching of AuNCs co-modified by bovine serum albumin and 3-mercaptopropionic acid (BSA/MPA-AuNCs). In the presence of NO2- under acidic conditions, Fe2+ can be readily oxidized and transformed to Fe3+, which can significantly suppress the fluorescence of BSA/MPA-AuNCs via non-radiative electron-transfer mechanism. The linear range and detection limit for this system were found to be 5-30 µM (r = 0.9975) and 0.7 µM, respectively. Other common anions and cations showed only very minor interference with the NO2- detection. Furthermore, the effectiveness of the proposed sensing strategy was validated by the demonstration of good performance in the determination of the amount of NO2- in ham samples, rendering it a powerful tool for the assessment of food security and water quality.

Sulfur doped graphene quantum dots as a potential sensitive fluorescent probe for the detection of quercetin.

In this work, a novel, selective and sensitive fluorescent probe (sulfur doped graphene quantum dots, SGQDs) was designed for real-time detection of quercetin in red wine samples. SGQDs were synthesized by pyrolyzing citric acid (CA) and 3-Mercaptopropionic acid (MPA) and characterized through advanced techniques. It was observed that fluorescence intensity of SGQDs could be substantially quenched by the addition of quercetin through inner filter effect (IFE) mechanism. Additionally, a visual color change (colorless to light yellow) was also noticed after addition of quercetin into a solution of SGQDs. The change in SGQDs fluorescence intensity with varying quercetin content revealed good linearity in the 0-50.0 µM range with regression coefficient of 0.9943 and a lowest detection limit of 0.006 µg/mL. To authenticate the real-time application of SGQDs as a potential fluorescent probe, red wine samples having different quercetin concentrations were used for quantitative analysis, after the optimization of several analytical parameters.

Initial report of γ-aminobutyric acidergic locomotion regulatory system and its 3-mercaptopropionic acid-sensitivity in metamorphic juvenile of sea urchin, Hemicentrotus pulcherrimus.

The γ-aminobutyric acid (GABA) signal transmission system (GSTS) contributes to larval swimming through the regulation of ciliary beating. However, whether this system also contributes to the primary podia (PP)-generated motility of juveniles remained unclear. The present study aimed to elucidate the involvement of the GSTS in the motility of metamorphic juveniles (juveniles) (1) by immunohistochemically elucidating the location of molecular constituents of the PP, and (2) by inhibiting the activity of GΑΒΑ decarboxylase (GAD) with 3-mercaptopropionic acid (3-MPA). During metamorphosis, the echinus rudiment protrudes its PP out of the body surface in 8-arm plutei. The PP expresses immunopositive signal (-IS) of GAD, GABA, GABAA receptor and tropomyosin, and is constituted with the GABA-IS negative distal tip and the GABA/GAD-IS gaiter region. The latter radiates distal projections to the disc that contains a GAD-IS cellular network. The juvenile body cavity houses a GABA/ßIII-tubulin-IS Penta-radial ring (PrR) that extends branches into each PP and several bridges to the GAD/GABA-IS Penta-radial plate (PrP) on the oral side but does not reach to the gaiter region. 3-MPA reversibly inhibits the juvenile motility and GABA-IS expression in the PrR/PrP complex. This indicates that the complex is the major contributor to the GABAergic motility in juveniles.

Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification.

Biosourced materials are gaining interest industrially, but there are still limitations on the library of available materials suitable for advanced manufacturing, especially using photopolymerization-based processing techniques. Terpenes, such as myrcene, are naturally produced materials possessing structural features, specifically alkenes, that avail themselves for such techniques. Free-radical and anionic polymerization techniques were used to explore molecular architecture, such as branching, as well as molecular weight and dispersity on physical properties prior to the production of 3D printing photopolymer resins. The polymyrcene resins were printed into dogbones and mold templates for soft materials. Model reactions with monofunctional thiols were used to demonstrate the potential for postpolymerization and fabrication functionalization, accompanying a physical demonstration where the surface hydrophobicity of polymyrcene could be tuned from superhydrophobic when using an alkyl chain monothiol (greater than 100° water contact angle) to a hydrophilic surface displaying a water contact angle of less than 45° compared with that of the unmodified surface (∼60°). Tunable bulk and surface properties are a unique feature for 3D printing materials and demonstrate the potential of polymyrcene and other biosourced photopolymers to a wide range of research applications.

Synthesis of water-soluble Ni(II) complexes and their role in photo-induced electron transfer with MPA-CdTe quantum dots.

Photocatalytic water splitting using solar energy for hydrogen production offers a promising alternative form of storable and clean energy for the future. To design an artificial photosynthesis system that is cost-effective and scalable, earth abundant elements must be used to develop each of the components of the assembly. To develop artificial photosynthetic systems, we need to couple a catalyst for proton reduction to a photosensitizer and understand the mechanism of photo-induced electron transfer from the photosensitizer to the catalyst that serves as the fundamental step for photocatalysis. Therefore, our work is focused on the study of light driven electron transfer kinetics from the quantum dot systems made with inorganic chalcogenides in the presence of Ni-based reduction catalysts. Herein, we report the synthesis and characterization of four Ni(II) complexes of tetradentate ligands with amine and pyridine functionalities (N2/Py2) and their interactions with CdTe quantum dots stabilized by 3-mercaptopropionic acid. The lifetime of the quantum dots was investigated in the presence of the Ni complexes and absorbance, emission and electrochemical measurements were performed to gain a deeper understanding of the photo-induced electron transfer process.

Tuning optical properties and optical rotation of 3-mercaptopropionic acid capped organic-inorganic hybrid perovskites.

The emission wavelength of organic-inorganic hybrid perovskite quantum dots (QDs) can be tuned by controlling reaction time relevant to the halide exchange. It is because halide exchange with different time would lead to different molar ratio of halides in perovskite QDs such as Cl and Br. Here, to research the ligand's effect on the halide exchange, this work synthesized 3-mercaptopropionic acid (MPA)-capped CH3 NH3 PbBrx Cl3-x QDs. It was found that SH- of MPA appeared to inhibit the halide exchange during the reation. Moreover, although the MPA-capped CH3 NH3 PbBrx Cl3-x QDs did not contain the chiral centre, they exhibit the optical rotation. This may provide a method for chirality manipulation of perovskite.